How to reset samsung water filter light

If the filter light is red on your Samsung display panel it’s time to change the water filter. If you don’t you’re likely to get water that doesn’t taste too good and has bits floating in it. If after changing the filter the light is still showing red you’ll have to manually reset the filter light.

Table of Contents

• Why Is It Important To Replace The Water Filter Regularly?
• How Does The Water Filter Indicator Work?
• How To Reset The Water Filter Light On your Samsung Refrigerator
• How To Unlock The Control Panel
• Filter Alarm Light Still Flashing?
• Frequently Asked Questions

Why Is It Important To Replace The Water Filter Regularly?

The way Samsung water filters work is by way of activated carbon which traps any impurities in the water and prevents them getting into your drinking water. Once the activated carbon becomes ineffective those particles which had been trapped can pass through the filter and into your drinking water. You should never leave the filter in place once the red light has appeared.

After successfully changing the filter, resetting the filter light is going to be a walk in the park. The hardest part will be identifying which buttons to press to effect a reset.

How Does The Water Filter Indicator Work?

Once the filter is reset the display light should be either green or blue depending on the model refrigerator you have. It will change colour to an orange colour after 450 gallons of water have passed through it or 5 months (whichever occurs first). Then after 500 gallons or 6 months it will change colour to red. Immediately it turns red, it’s time to change the filter to avoid foul tasting water and the presence of minute particles in your water.

In hard water areas you might just find your water filter needs replacing sooner than 6 months. It could be that after just 4 or 5 months you need to replace your water filter. As the filter light system works on how many gallons of water has passed through the system or how much time has elapsed, if you are in a hard water area you will not be able to rely on the display screen to notify you it needs replacing.

How To Reset The Water Filter Light On your Samsung Refrigerator

Once you’ve changed the filter There’s a strong possibility the red light will still be on display. That means you’ll need to reset the display yourself. This is a simple task to perform but there are various ways to do it depending on the model you have.

We have found that different models have totally different systems when it comes to resetting the water filter light.

If after implementing one of the above resets on your Samsung refrigerator the filter light does not reset, check that the buttons are not locked. If any buttons are locked the reset function will not work.

How To Unlock The Control Panel

To unlock the control panel hold the lock button (which should be flashing) down for 3 seconds or until flashing stops. There are other ways to unlock the control panel depending which model refrigerator you own. Consult your hand book for more information.

Filter Alarm Light Still Flashing?

If, after completing the reset function your Samsung water filter light is still flashing check the following;

• Is the filter fitted correctly?
• Did you use a genuine Samsung replacement filter?
• Was the correct filter for your fridge used?

If any of the above apply you might have to restart with a new, correct water filter and fit it correctly.

Frequently Asked Questions

I live in a hard water area, how often should I replace my Samsung water filter?

If you live in a hard water area it is advisable to replace the water filter in your Samsung refrigerator every 3 to 4 months instead of the recommended 6 months.

The Samsung refrigerator is one of the most reliable brands of refrigerators to this day. One of its most useful features is the Filter Light. The Filter Light is mostly located at the top right corner of the refrigerator door and its purpose is to let you know when it’s time to change the charcoal filter.

This guide will help you reset Filter Light On Samsung Refrigerator so you won’t have to worry about forgetting when to change it.

When the filter reset light in your Samsung water filter won’t go off even after you’ve successfully changed the filter, remember that it only blinks red to let you know when it is time to change the filter.

A Samsung fridge water filter replacement can be tricky, but it’s not rocket science. If you follow the steps we show you below and reset the filter light, you should get a working filter, and the filter light will go off. We also have tips for other common problems that might come up during a Samsung fridge water filter replacement.

How To Reset Filter Light On Samsung Refrigerator – Step By Step Guide

Most Samsung refrigerators have a filter indicator light that illuminates when the water and ice filter require replacing. This can be annoying if you don’t use a lot of water or ice in your home, but luckily there is a way to turn this feature off.

When Samsung refrigerators have a red filter icon on the display panel, it means a service indicator has been activated. To turn off the indicator, hold down the filter reset button for 2-3 seconds.

This is a good reminder that if you can’t find the filter reset button on your refrigerator, check your owners’ manual. It may be on the front of your fridge.

Samsung fridges have a WATER FILTER button and an ICE/WATER button. To reset the water filter light on Samsung fridges, you can either press and hold down the WATER FILTER button for three seconds or the ICE/WATER button for three seconds.

If your refrigerator filter light is on, you need to reset the water filter. The reset procedure for different models of Samsung fridges is different, so we will cover the steps for many popular models (their typical steps).

Samsung Refrigerator filter Light Reset Steps For model RF28K9070SR

There are two ways to reset the filter indicator on your RF28K9070SR model. From the control panel, press and hold down the Ice-Maker button for 3 seconds to reset the filter indicator. If you still have trouble after performing these steps, contact customer service.

Samsung French Door Refrigerator filter Light Reset Steps For model RF260/BEAESR/AA

To turn off the alarm, you need to press and hold down the ALARM/HOLD button for 3 seconds. This will disable the alarm immediately on units with interior controls. For units with exterior controls like disc-style buttons or membrane switches, you will have to press and hold down the FRIDGE+POWER COOL button for 3 seconds.

Samsung Refrigerator filter Light Reset Steps For model DA29-00003G

When you push down on your ice maker’s ALARM/HOLD button for three seconds, the refrigerator filter replacement warning light will reset itself.

Samsung Refrigerator filter Light Reset Steps For model RF23J9011SG/AA

Press and hold the “CRUSHED ICE” button for three seconds to clear the water filter warning.

Samsung Refrigerator filter Light Reset Steps For model RF24R7201SR/AA

In many Samsung fridges, pressing the Filter Reset button for 3 seconds will switch off the filter reset indicator. The Filter Reset corresponds to a light on the dispenser which indicates that the water filter is due for replacement. If the filter reset indicator light is illuminated, a new water filter is required.

Samsung Refrigerator filter Light Reset Steps For model RF263BEAESR

If your RF263BEAESR Samsung refrigerator water filter won’t reset automatically, try the following step:

Touch and hold down the ICE TYPE/WATER button for 3 seconds. Release the button. Touch the FRESHENER light 7 times within approximately 15 seconds. The filter indicator light will blink once.

Samsung Refrigerator filter Light Reset Steps For model RF23J9011SR

If your Samsung refrigerator RF23J9011SR water filter is not functioning, you can reset this error by holding the “Crushed/Hold” button and the “Normal Dispense” button together for 3 seconds.

Other Possible Solutions

If you can’t get the red error light to turn off, there are a few things you can try before calling for support. That said, if your fridge is still under warranty, try this first:

Ensure That Control Panel Is Unlocked

You must first “unlock” the fridge controls for the filter reset button to work. Consult your manual book for instructions on how to do this.

Ensure That Filter is Seated Correctly

If the filter light is still blinking, open the door and check if filter is seated properly. Poor seating may cause poor water flow. Make sure the filter is fully inserted into the unit and that both sides of the filter are correctly inserted into the guide rails.

Ensure That Filter is Correctly Installed

The light notification on Samsung refrigerators may not clear if you’ve installed a filter that isn’t genuine, and this means that it has to be removed and replaced.

Final Thoughts

This DIY repair guide is great for anyone looking to fix their refrigerator’s water filter light. After you’ve mastered the instructions in this article, you’ll understand how to properly reset the filter light on a Samsung fridge and get rid of your water filter warning.

We hope we’ve given you all the information you need to reset your Samsung refrigerator. If we’ve missed anything or if you’re still having trouble, then please let us know in the comments.

How do you reset the water filter light on a Samsung refrigerator?

How do I reset the water filter light on my Samsung side by side refrigerator?