How to reset oil change light on jeep renegade

Haven’t had an oil change on my Renegade yet, but lots on my old Patriot.

It can suck!

  1. Close all doors.

  2. Set the gear to the PARK position.

  3. Turn ignition to RUN position, don't start the engine.

  4. Fully depress the accelerator pedal slowly three times within 10 seconds.

  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Some one mentioned do it fast twice, then slow the 3rd? But it’s 3 times and there is a time limit. It matters!

Sounds the same on a Renegade, lol…

But, where is park on a manual, good Q! Might need to download a service manual for yours and check how to do it on a manual…

Reset oil service light Jeep Renegade. How to reset maintenance light, reset service light indicator. Can be made manually by use button on car dash board.

How do you reset oil service light Jeep Renegade.

Many Jeep vehicles track the intervals between oil changes to alert the driver when the next oil change is needed.

A light illuminates on the control panel when the internal system determines it is time for an oil change.

Most Jeep mechanics reset the oil light as part of the oil change service.

If you change the oil in your Jeep yourself, you can manually reset the oil light.

Resetting the oil light after an oil change allows the system to accurately track the time until the next oil change is needed.

The procedures described in this article apply to 2010 Jeep models.

Instruction

  1. Turn the ignition switch to the ON position. Do not start the engine.
  2. Press the accelerator pedal completely to the floor slowly three times within a 10 second span.
  3. Turn the ignition switch to the OFF position.
  4. Turn the ignition switch to the ON position again. The oil light should be off. If the oil light is still illuminated, repeat the previous steps.

That it is the full procedure how to reset oil service light Jeep Renegade. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Jeep cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Jeep vehicles.

Jeep Renegade Oil Change Required Service Maintenance Indicator Reminder Reset

A simple tutorial on how to reset the oil change required service maintenance reminder message light on Jeep Renegade from the year 2014-2015-2016-2017-2018-2019-2020.

How to reset oil change light on jeep renegade

STEP 1

  • Close all doors.

STEP 2

  • Set the gear to the PARK position.

STEP 3

  • Turn ignition to RUN position, don’t start the engine.

STEP 4

  • fully depress the accelerator pedal slowly (5x)FIVE TIMES within 10 seconds.

STEP 5

  • Turn the ignition off and then start the engine to verify the indicator has been reset.

About Jeep Renegade

The Jeep Renegade (BU/520) is a subcompact crossover SUV (mini SUV in Europe) produced by Jeep. The off-road vehicle was first shown to the public in March 2014 at the Geneva Motor Show and production started in late August of that year. Standard Renegade models come with front-wheel drive. The vehicle offers the four-wheel drive systems Active Drive I and Active Drive Low, both of which are paired with Jeep’s Selec-Terrain system.

At one time it was believed that the Renegade would replace the Jeep Compass and Jeep Patriot in the Jeep lineup. The Patriot was discontinued after model year 2017, but the second generation Compass was launched in early 2017.

The Renegade is the first Jeep product to be produced exclusively outside of North America and is sold in the North American, European, Brazilian, South African, Australian, Japanese and Chinese markets. The vehicle is built in Melfi, Italy (alongside the related Fiat 500X); Goiana, Brazil (alongside Jeep Compass and Fiat Toro); and in Guangzhou, China.

Standard Renegade models come with front-wheel drive, with four-wheel drive available on Sport, Latitude and Limited trims.In the US, the lineup consists of Sport, Latitude and Limited trims, all of which come with a choice of front- and four-wheel drive, as well as the Trailhawk trim, which is 4WD only.

The Renegade has an available My Sky dual panel removable roof. The My Sky can be either retracted like a standard sunroof or removed completely for a more open-air experience, similar to that of the Jeep Wrangler.

In June 2018, the Renegade was updated with some slight aesthetic touches: the front and rear bumpers have been redesigned, new LED headlamps (the same ones used for the Wrangler) were adopted, and the front grille is larger.

The infotainment system was upgraded with a new, more up-to-date processor and a more generous display that varies from 7″ up to 8.4″ in the navigator version. The displays are all multitouch and the customizable menus also offering the possibility to adjust the air conditioning. Android Auto and Apple CarPlay compatibility was introduced.

The Longitude version now also has USB jack on the back of the armrest dedicated to passengers sitting in the rear seats.

The European version introduced the new gasoline engines of the Global Small Engine (FireFly) family produced by FCA Poland Powertrain in Bielsko Biala (POLAND) in two versions: 1.0 L Turbo 3-cylinder 120 hp with direct injection, Multiair system and GPF filter, and 1.3 L Turbo Multiair with direct injection and GPF filter 110 kW (148 hp; 150 PS) and 132 kW (177 hp; 179 PS). The 1.0 L is available with a 5-speed manual transmission and front-wheel drive, the 1.3 L with a 6-speed manual transmission, a 6-speed automatic double clutch or a 9-speed ZF automatic with front or 4-wheel drive. The diesel engines introduced the SCR system and are approved Euro6D-Temp.

In September 2018 the facelifted Renegade was unveiled for the North American market (MY2019) which introduced the 1.3 L GSE Turbo Multiair engine with 132 kW (177 hp; 179 PS) as a replacement for the 1.4 L Fire Turbo Multiair, while the 2.4 L Tigershark engine remains available. The North American model has the same changes applied to the European model.

In October 2018, the updated version for the South American market produced by FCA of Gioiana (Pernambuco) in Brazil was introduced and presents only aesthetic updates with the adoption for all versions of the Trailhawk bumpers; the front and rear headlamps remain those of the previous model. The engines for the South American market are the 1.8 L E.Torq Evo gasoline and the 2.0 L Multijet diesel.(source:wiki)

Post navigation

How do you reset the service light on a Jeep?

Press the gas medal to the floor slowly 3 times within a 10-second time frame. Turn the ignition off. After about 10 seconds, start the engine. The “Perform Service” indicator should now be reset.