2010 lexus es 350 oil light reset

Tired of ads? Remove them as a Premium Member. Read more

Table of Contents Show

To reset the 2015 Lexus ES maintenance data, please follow these instructions:
1. With the engine running, switch the display to TRIP METRE A; then turn ignition off. 2. While pressing the ODO TRIP button turn the ignition switch to on (do not start engine). 3. "Resetting Oil Maintenance Data" will display and continue to hold button until trip meter displays "000000". 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
To reset the 2011 Lexus ES350, please follow these instructions:
1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
Watch video below for clarity;
See Also: How To Reset Maintenance Required Light In 2010-2015 Lexus RX350 After Oil Change
Oil Change Light Reset Lexus ES350 2008 2009 2010 2011 2012 Procedure
Oil Viscosity and Capacity
Not Working?
Oil Life Monitor Reset Procedure Frequently Asked Questions

Mar 29

2015 Lexus ES 350

To reset the 2015 Lexus ES maintenance data, please follow these instructions:

1. With the engine running, switch the display to TRIP METRE A; then turn ignition off. 2. While pressing the ODO TRIP button turn the ignition switch to on (do not start engine). 3. "Resetting Oil Maintenance Data" will display and continue to hold button until trip meter displays "000000". 4. Turn the ignition off and then start the engine to verify the indicator has been reset.

ODO TRIP Button

Tired of ads? Remove them as a Premium Member. Read more

Dec 03

2011 Lexus ES350

To reset the 2011 Lexus ES350, please follow these instructions:

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.

2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

2011 Lexus ES350 Trip Button

This article shows you the steps for resetting the maintenance required light on the dashboard of Lexus ES350. The procedure is same for 2007-2012 ES350

The ‘oil maint reqd’ light in your Lexus simply means a service interval has been met. And this means engine oil is due for change. It comes on 5,000 miles after the last time it was reset.

This light comes on strictly as a function of miles covered by your car, and it is never an indication that something is wrong with your car. So your heart doesn’t skip a beat whenever it pops up on your dashboard.

Below are the steps you should follow to reset the maintenance required light in your 2008 – 2012 Lexus ES350.

Turn the ignition switch to the ON position. This is done by pressing the power button twice in quick succession Without touching the brake pedal.
Press the TRIP button, to display TRIP A.
Turn Off the ignition.
Press and hold the TRIP button, then turn the ignition On, keep holding the TRIP button until the 000000 is displayed on the screen and the OIL MAINT REQD Message is gone.
Turn off the ignition, oil reset is complete.

We hope this helps!!!

Watch video below for clarity;

See Also: How To Reset Maintenance Required Light In 2010-2015 Lexus RX350 After Oil Change

Emeka is a Contributor at Autojosh. A graduate of Electrical/Electronic Engineering with a B.Eng degree. Emeka is a car enthusiast who is interested in traveling, writing, movies and driving. He also loves drinking garri with cold water.

The Oil Change Light Reset Lexus ES350 2008 2009 2010 2011 2012 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due.

Below is the Oil Change Light Reset procedure for the Lexus ES350 2008 2009 2010 2011 2012 . Follow the steps below to reset the oil life monitor after each oil change.

Oil Change Light Reset Lexus ES350 2008 2009 2010 2011 2012 Procedure

Turn the ignition to the “RUN” position (press “START/ STOP” button once).
Switch display to trip meter “A”, then turn the ignition off.
Hold down the “TRIP METER RESET” button while turning ignition to the “RUN” position (press “START/STOP” button once).
Hold down button until “000000” is displayed.
Turn the ignition off.

Oil Viscosity and Capacity

The 3.5 liter engine holds approximately 6.4 quarts (6.1 liters) of 5W-30 oil when the engine oil and filter are changed.

Not Working?

If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Lexus ES350 2008 2009 2010 2011 2012 procedure above. If this is not the oil life monitor reset procedure for your vehicle, restart your oil light reset procedure search HERE

Oil Life Monitor Reset Procedure Frequently Asked Questions

If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.

Notice

Due to the wide range of vehicles makes and models, this is general information and should not be taken as specific to any vehicle. Please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This information is meant to be used as a guideline only.

lexus es oil light reset