Kenmore series 300 washer triple action agitator manual

Kenmore 25132 4.3 cu. ft. Top Load Washer w/Triple Action Impeller - Use Manual - Use Guide PDF.
Documents: Go to donwload!

• Owner's manual - (English, French, Spanish)

Use & Care Guide Top-Loading High Efficiency Low-Water Washer Kenmore 25132 

Table of Contents

• WASHER SAFETY
• WHAT’S NEW UNDER THE LID?
• CONTROL PANEL AND FEATURES
• CYCLE GUIDE
• USING YOUR WASHER
• WASHER MAINTENANCE
• TROUBLESHOOTING
• PROTECTION AGREEMENTS
• WARRANTY
• ASSISTANCE OR SERVICE

WHAT'S NEW UNDER THE LID?

Automatic Load Size Sensing

• Once you start the cycle, the lid will lock, and the washer will begin the sensing process to determine the correct water level for the load. This may take several minutes before water is added. You will find a step-by-step description in the “Cycle Status Lights” section.
• Initially the basket will start to spin prior to adding water, this is part of the sensing process and is normal. This low-water wash method uses less water and energy compared to a traditional agitator-style washer.

Choosing the Right Detergent

• Use only High Efficiency detergents. The package will be marked “HE” or “High Efficiency.” Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer’s instructions to determine the amount of detergent to use.

Improved Cleaning

• Low-water cleaning means concentrated cleaning. Rather than diluting detergent as done in an agitator-style washer, this washer delivers the detergent directly to the soils. This low water wash also allows the clothing to move in a more effective way to remove soils.

Normal Sounds You Can Expect

• At different stages of the wash cycle, you may hear sounds and noises that are different from those of your previous washer. For example, you may hear a clicking and hum at the beginning of the cycle, as the lid lock goes through a self-test. There will be different kinds of humming and whirring sounds as the washplate moves the load and as basket is decelerating to stop. And sometimes, you may hear nothing at all, as the washer determines the correct water level for your load or allows time for clothes to soak.

WASHER MAINTENANCE

WATER INLET HOSES

• Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.
• When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best 

1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer’s instructions regarding the amount of HE detergent to use. Never use more than the recommended amount because that may increase the rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor. 
2. Use warm and hot wash water settings sometimes (not exclusively cold water washes), because they do a better job of controlling the rate at which soils and detergent accumulate. 
3. Always leave the washer lid open between uses to help dry out the washer and prevent the buildup of odor-causing residue.

Cleaning Your Top Loading Washer

• Read these instructions completely before beginning the routine cleaning processes recommended below. This Washer Maintenance Procedure should be performed, at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils and detergent may otherwise accumulate in your washer.

Cleaning the Inside of the Washer

• To keep your washer odor-free, follow the usage instructions provided above, and use this recommended monthly cleaning procedure.

Clean Washer Cycle

• This washer has a special cycle that uses higher water volumes in combination with liquid chlorine bleach to clean the inside of the washer.

NON-USE AND VACATION CARE

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps: 

1. Unplug or disconnect power to washer. 
2. Turn off water supply to washer, to avoid flooding due to water pressure surge.

WINTER STORAGE CARE

To winterize washer: 

1. Shut off both water faucets; disconnect and drain water inlet hoses. 
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and remaining water. 
3. Unplug washer or disconnect power.

Newest Added: 80372 32713 91362 45209 14579

Series: Series 500

Also, These documents are for others Kenmore models: 110.2513*410, 110.25132410

Tags: Kenmore High Effency Low Water Washing Machine, Kenmore Top Load Washer, Kenmore Top Load Washer Manual, Kenmore Top Loading Washer, Kenmore Washer Model# 110, Kenmore Washer 110, Kenmore HE Model 110

Why is my Kenmore washer not agitating?