Still have questions or concerns? Consult your Owner's Manual.Consult your Owners Manual or schedule a service with a nearby dealership. Show
Countless reasons to join.Create an account and get the most out of your Toyota today.
©2011-2022 Toyota Motor Sales, U.S.A., Inc. All rights reserved. All information contained herein applies to
vehicles registered in the 48 U.S.-contiguous
Toyota RAV4 owners have reported 16 problems related to brake electric antilock (under the service brakes category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Toyota RAV4 based on all problems reported for the RAV4. 1 Brake Electric Antilock problem of the 2010 Toyota RAV4Failure Date: 03/01/2012 S10 appropriate handling- letter to the secretary from re copy of letter addressed to mr james lentz, president and ceo of Toyota motor sales, regarding safety problems with the 2010 Toyota rav 4 the consumer stated when there was snow on the street with slipper road conditions, the abs engaged, which made the brakes inoperable. The consumer stated she has been to the dealer on several occasions, only to be told there was nothing wrong. There have been several situations, where the vehicle would not stop when the abs engaged. On one occasion, the consumer had to push the brake all the way to the floor and eventually landed in the middle intersection of oncoming traffic. The second time, she almost rear ended another vehicle, when suddenly the vehicle accelerated when she applied the brake. The only way, she was able to stop the vehicle, was by turning into another lane which caused the abs to go off which rendered the brakes to work again. See all problems of the 2010 Toyota RAV4 🔎. 2 Brake Electric Antilock problem of the 2011 Toyota RAV4Failure Date: 11/01/2011 The contact owns a 2011 Toyota Rav4. The contact was driving 50-55 mph when the brakes were applied and the brake pedal felt loose, became stick. The vehicle was taken to three dealerships where a diagnostic was performed and all three dealers were unable to locate a failure code. The vehicle was also test driven but the failure was unable to be duplicated. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was 4,991 and the current mileage was 8,613. . . . . Updated 06/18/12 the consumer stated the brakes were spongy and the bas did not engage the distance to stop vehicle. See all problems of the 2011 Toyota RAV4 🔎. 3 Brake Electric Antilock problem of the 2005 Toyota RAV4Failure Date: 06/25/2010 The contact owns a 2005 Toyota Rav4. While driving approximately 25 mph with the brakes engaged, there was minimal resistance. The anti lock braking system engaged in order for the contact to stop the vehicle. The check abs brake and track warning lights were illuminated. The vehicle was taken to the dealer who performed a diagnostic test and confirmed that a faulty abs activator caused the failure to occur. This was an internal failure which prevented the brakes from communicating with the computer. The repair part#44050-42161 is required to repair the failure at an estimated cost of $3000. The manufacturer was called and stated her warranty was no longer valid. She was expecting a call from a Toyota representative. She filed claim#1006300590 with the manufacturer. The failure and current mileages were 21,613. See all problems of the 2005 Toyota RAV4 🔎. 4 Brake Electric Antilock problem of the 2006 Toyota RAV4Failure Date: 06/06/2006 : the contact stated while attempting to apply brake pressure the brakes had excessive travel and sponginess. This occurred at various speeds without warning during normal braking on normal roads. The dealership was unable to duplicate the problem. The manufacturer has been alerted. Updated 06/27/06. See all problems of the 2006 Toyota RAV4 🔎. 5 Brake Electric Antilock problem of the 2004 Toyota RAV4Failure Date: 11/01/2005 : the contact stated the oil was completely depleted in the vehicle before it reached 12000 miles. On a dry road, the vehicle's stopping distance was greatly extended, and greater force than usual had to be applied to stop the vehicle. It was taken to the dealer who suggested calling NHTSA. See all problems of the 2004 Toyota RAV4 🔎. 6 Brake Electric Antilock problem of the 2004 Toyota RAV4Failure Date: 10/29/2004 2004 Toyota Rav4. Consumer states vehicles lurches forward the consumer stated within the first three months of driving the vehicle, he noticed when he would brake, such as approaching a stop sign, the vehicle would lurch forward. The consumer took the vehicle to the dealer, but they were unable to find a problem. The consumer took the vehicle back to the dealer again and t\hey found the abs actuator was not pumping properly. The consumer has since traded the vehicle. 8 Brake Electric Antilock problem of the 2001 Toyota RAV4Failure Date: 08/24/2001 While coming to complete stop by pressing abs brakes, vehicle suddenly accelerated and hit a stonewall. Dealer has been contacted. Please provide further details. Consumer has taken photographs of vehicle/ wall and ground, showing no tire marks.
9 Brake Electric Antilock problem of the 2001 Toyota RAV4Failure Date: 04/10/2001 Rear brake drums made a noise. When applying brakes,they grab and pull, making vehicle jerk. Also, front brakes would grind, and stopping distance increase when brakes are applied. Contacted dealer ,and dealer stated there was a technical service bulletin on vehicle, but consumer can't get adequate information. 10 Brake Electric Antilock problem of the 1999 Toyota RAV4Failure Date: 11/01/2000 While vehicle is traveling at any speed, and in order to depress brake pedal and stop vehicle, consumer had to "stand on brake pedal. Dealership has examined vehicle five times, and failed to determine a cause for this problem. Please provide any additional information / documentation. See all problems of the 1999 Toyota RAV4 🔎. 12 Brake Electric Antilock problem of the 1996 Toyota RAV4Failure Date: 11/08/1996 Failure on the brake pedal, when applying force to the brakes, the brake pedal makes a clicking sound and will jump up and down and goes to the floor, causing the vehicle to continue to move. 13 Brake Electric Antilock problem of the 1998 Toyota RAV4When applying brakes pedal goes to floor ,causing extended stopping distance. Also, vehicle continues to accelerate after brakes are applied. Please give any further details. See all problems of the 1998 Toyota RAV4 🔎. 14 Brake Electric Antilock problem of the 1998 Toyota RAV4While passing a truck brakes locked up. Dealer was contacted . Please provide further information. 15 Brake Electric Antilock problem of the 2003 Toyota RAV4While coasting down a hill driver began to depress the brakes and there was no brake pressure. Also, driver had difficulty with the vehicle down shifting at anytime. See all problems of the 2003 Toyota RAV4 🔎. 16 Brake Electric Antilock problem of the 2001 Toyota RAV4The brakes screetch when applied. The sound is particularly startling if the brakes are applied quickly. This sound is not the "wear sensor" sound (dealer checked brakes and said they are fine). This sound is different than the standard squeky brakes you hear on some cars and is very concerning. The windshield would rattle while driving (dealer put in a gasket and sound stopped). Other Common Service Brakes related problems of Toyota RAV4How do you reset the ABS light on a Toyota RAV4?If you're sure your brakes are fine, then you can follow these steps to reset the ABS light in your Toyota: Step 1: Open your hood and remove the negative battery cable with a socket wrench. Step 2: Wait for at least three seconds. Step 3: Reconnect the negative battery cable to your car battery.
What does it mean when your antiFour Reasons Your Anti-lock Brake System Light Can Come On
The four common reasons that typically cause this light to turn on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off.
How do I reset my antiResetting Your ABS Dashboard Warning Light
Step One: Disconnect the positive cable from your car battery. Then, hold down the brake pedal to drain the vehicle's electrical system. This will result in a reset of the car's central computer. Plug the cable back in to restore power.
Is it safe to drive with the antiIf your ABS light comes on individually, you are safe to drive your car to your destination, as your normal brakes will still work. You will, of course, have to be more careful as your ABS will not respond in case of an emergency.
|
Anti lock brake system malfunction rav4
Related Posts
Copyright © 2024 en.ketajaman Inc.
