Save $166.43 Show
Description2019-2022 Jeep Cherokee Trailhawk, Trailhawk Elite, Upland Precut Paint Protection Kit (PPF) Front BumperIncluded: |
| Jeep Cherokee Trailhawk | 2019,2020, 2021,2022 |
|---|
| Make | Model | Year |
|---|---|---|
| Jeep | Cherokee Trailhawk | 2019 - 2022 |
Engine Make Model Trim Year Notes 2.0L 1997CC 122Cu. In. l4 GAS DOHC Turbocharged Jeep Cherokee Altitude Sport Utility 4-Door 2020 2.4L 2360CC 144Cu. In. l4 GAS SOHC Naturally Aspirated Jeep Cherokee Altitude Sport Utility 4-Door 2020 3.2L 3239CC 198Cu. In. V6 GAS DOHC Naturally Aspirated Jeep Cherokee Altitude Sport Utility 4-Door 2020 2.0L 1997CC 122Cu. In. l4 GAS DOHC Turbocharged Jeep Cherokee High Altitude Sport Utility 4-Door 2020 2.4L 2360CC 144Cu. In. l4 GAS SOHC Naturally Aspirated Jeep
Finally a front bumper solution to give your Cherokee Trailhawk a more aggressive look without breaking the bank. Unlike those "BULL BARS", the MFC Offroad Hybrid Bumper retains structural front end strength and does NOT detract from your approach angle. Utilizing a patented design that mounts directly to the OEM red recovery hooks, there is no need to drill, trim, cut, zip tie or remove any part of your 2014-2021 Cherokee to install this. Installation is a breeze, and gives your KL more attitude, protection, mount points for lighting all while increasing rigidity for off angle recoveries.
We say "HYBRID" because it is just that! You get the best of both worlds retaining recovery points, adding tube bumper brush protection and locations to mount additional lights to your Jeep.
Installation video shows Insta-pak packaging that is no longer available; your bumper will ship in a similar box protected inside wrapped and all air voids filled to ensure safe delivery.
**FITS EVERY SINGLE YEAR CHEROKEE TRAILHAWK **
**All bumpers are built to order and are not cancelable**
**Redesign allows for the integration of our 7" Hybrid LED Lighting System**
**Care package available upon request (includes touch up paint for road debris damage at an additional charge)**
Notes:
1) All tubular bumpers have optional RED SHACKLES to match the OEM tow hook points. Included with the shackles are newer isolators that require zero trimming like the
original ones as well as rubber bump protectors to prevent noise while off roading. Some tolerance differences on the factory hooks require the use of the MFC Offroad shims, included in the package. These will eliminate the tolerance variation and provide a secure and tight fit.
2) This does NOT impede your fog lights beam pattern for 2014-2018 model years or any of the technology package
sensors for the ACC front end system. When installed, the bar will sit roughly 1” above the cutoff line.
