2014 mazda cx 5 wiper blades

Website Special: $1 off (1 set min)

Discount Code: SX24YMNS

• HOW TO CHANGE WIPER BLADES
• | HOW TO CHANGE Mazda WIPER BLADES
• | HOW TO CHANGE Mazda CX-5 WIPER BLADES

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.

1. Buy your new Trico® Standard Steel Frame Wipers

   • Precision Cut Rubber Edge
   • Steel Superstructure And Twin Rail Design
   • Seasonal (Note: Not recommended for extreme freezing conditions)
   • Good economical windshield wiping for your Mazda CX-5
   • Buy your Trico® Standard Steel Frame Wipers for your 2014 Mazda CX-5 $17.99 ea.

2. Prepare your Mazda CX-5 for an easier wiper change

   Turn ON your wipers then turn off your Mazda CX-5 when the wipers are at their mid-way point on your windshield
   

3. Lift your wipers up from the windshield

   With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
   Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

4. Before you remove old wiper blades

   Be sure to take note of which new blade length goes on which side.
   Measure or just compare old blade length to the new Trico® wiper blades.
   Then place the new blades on the correct side.

5. Remove old wiper blades

   Your 2014 Mazda CX-5 has a small hook attachment for the windshield wipers to connect with.
   

   
   Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.

6. Connect the new Trico® Standard Steel Frame Wipers

   
   
   
   

7. Check all connections...

   Double check that wiper blades and adapters are locked on to the wiper arms.

8. Lower wipers back down to their functional positions.

   Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
   

Congratulations! You just installed new Trico® Standard Steel Frame Wipers on your 2014 Mazda CX-5!

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.

1. Buy your new Trico® Tech Beam Blade wipers

   • Great all-weather beam wipers from Trico® The Leader in Wiper Blade Technology.
   • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
   • Just smooth consistently safe windshield wiping for your Mazda CX-5
   • Buy your Trico® Tech Beam Blade wipers for your 2014 Mazda CX-5 $19.99 ea.

2. Prepare your Mazda CX-5 for an easier wiper change

   Turn ON your wipers then turn off your Mazda CX-5 when the wipers are at their mid-way point on your windshield
   

3. Lift your wipers up from the windshield

   With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
   Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

4. Before you remove old wiper blades

   Be sure to take note of which new blade length goes on which side.
   Measure or just compare old blade length to the new Trico® wiper blades.
   Then place the new blades on the correct side.

5. Remove old wiper blades

   Your 2014 Mazda CX-5 has a small hook attachment for the windshield wipers to connect with.
   

   
   Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.

6. Connect the new Trico® Tech Beam Blade wipers

   Slide the new blade on to the hook and push the blade in to the armhook until it locks in place.
   

   
   

7. Check all connections...

   Double check that wiper blades and adapters are locked on to the wiper arms.

8. Lower wipers back down to their functional positions.

   Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
   

Congratulations! You just installed new Trico® Tech Beam Blade wipers on your 2014 Mazda CX-5!

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.

1. Buy your new Trico® Force Premium Beam Blade wipers

   • Great all-weather premium beam wipers from Trico® The Leader in Wiper Blade Technology.
   • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
   • Trico® Force has additional air foils to keep the blades stuck to the windows at higher speeds and No lifting in high winds.
   • Just smooth consistently safe windshield wiping for your Mazda CX-5
   • Buy your Trico® Force Premium Beam Blade wipers for your 2014 Mazda CX-5 $24.99 ea.

2. Prepare your Mazda CX-5 for an easier wiper change

   Turn ON your wipers then turn off your Mazda CX-5 when the wipers are at their mid-way point on your windshield
   

3. Lift your wipers up from the windshield

   With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
   Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

4. Before you remove old wiper blades

   Be sure to take note of which new blade length goes on which side.
   Measure or just compare old blade length to the new Trico® wiper blades.
   Then place the new blades on the correct side.

5. Remove old wiper blades

   Your 2014 Mazda CX-5 has a small hook attachment for the windshield wipers to connect with.
   

   
   Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.

6. Remove plastic protector

   Before installation, of the new wiper blade, slide off the plastic protector from the blade rubber.

7. Connect the new Trico® Force Premium Beam Blade wipers

   Slide the new blade on to the hook and push the blade in to the armhook until it locks in place.
   

   
   

8. Check all connections...

   Double check that wiper blades and adapters are locked on to the wiper arms.

9. Lower wipers back down to their functional positions.

   Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
   

Congratulations! You just installed new Trico® Force Premium Beam Blade wipers on your 2014 Mazda CX-5!

Because we guarantee them to fit

What size windshield wipers do I need for 2014 Mazda CX

What size windshield wipers does a Mazda CX

What size windshield wipers do I need for a 2014 Mazda 3?