Show
Estimate price near meIncluded for free with this service 12-month / 12k-mile warranty Free 50 point safety inspection Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.
How much does a Center Support Bearing Replacement cost?On average, the cost for a Kia Sorento Center Support Bearing Replacement is $235 with $111 for parts and $123 for labor. Prices may vary depending on your location.
Show example Kia Sorento Center Support Bearing Replacement prices What is the Center Support Bearing all about?While many of the cars on the road today use a front-wheel drive format, there are plenty of rear-wheel drive vehicles out there. These range from trucks to SUVs to passenger cars, and they all use drive shafts that connect the transmission to the rear differential in order to turn the rear wheels. However, in very long drive shafts made with two sections, strains are problematic. A center support bearing is used to provide support for the shaft, reduce strain on drivetrain components, and allow the shaft to turn freely. It is a universal joint that allows free motion even if the shaft isn’t fully straight. If the center support bearing is worn, seized, or damaged, you will hear excessive squeaking noises or experience a “binding” feeling when driving. Keep in mind:
How it's done:
Our recommendation:Your center support bearing should be inspected on a regular basis (during normal maintenance, such as an oil change) for signs of wear and tear. It should be replaced by one of our expert mechanics immediately if they notice any damage. What common symptoms indicate you may need to replace the Center Support Bearing?
How important is this service?Because the center support bearing upholds the drive shaft and ensures that it can spin freely, part failure is a serious concern. If the bearing freezes, you can easily damage transmission components, differential components, or even the drive shaft itself. We recommend immediate replacement. Fast and easy service at your home or office Backed by 12-month, 12.000-mile guarantee Recent articles & questionsKey stuck in ignition switchI believe the part you might be referring to is not the ignition switch but rather the lock cylinder. The ignition switch as an actual electronic switch located further down the steering column on your vehicle. The lock cylinder is... 1998 Toyota Corolla won't accelerateA low fluid level will cause the transmission to not go into a drive gear fully. The differential seals from the transaxle can leak, and cause fluid level to drop. If these seals are leaking, they will need to be... My turn the key to on but not to start the car what should I doIf the ignition key is stuck or doesn't turn, or there is a problem with the ignition switch in the steering column, just request an electrical component diagnostic (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection) and the responding certified mechanic will assist you. If, however,...
How long does it take to replace a center support bearing?That's very difficult to answer due to the multiple variables involved in removing and replacing hard to access components such as the center driveshaft on a front wheel drive vehicle like your Edge. However, in general, this type of job can often be completed in one business day; or less than 8 service hours.
What happens when a Centre bearing fails?For example, if the center support bearing completely fails, the driveshaft may flex to the extent that it comes in contact with the underside of the vehicle, causing damage and turning a simple part replacement into extensive downtime and repairs.
How much does it cost to replace a drive shaft bearing?The average cost for carrier bearing replacement is between $293 and $386. Labor costs are estimated between $132 and $167 while parts are priced between $161 and $220. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
|