Update
Now Reading
How To Update Samsung Galaxy S DUOS GT-S7562 Software
To Update Samsung Galaxy S Duos GT-S7562 Software you need to install a newer firmware version on it. You can update your Samsung Galaxy S Duos GT-S7562 without a computer by going to Settings > About Device > Software Update. Also, You can update this Samsung device manually, But you need to use a computer.
In this Guide, You will learn how to update Samsung Galaxy S Duos GT-S7562 manually by using the Odin3 flasher and Samsung Stock Firmware files.
Samsung Galaxy S Duos GT-S7562 Update Check List:
1- The Software Update process will wipe all your data, So backup all the wanted data (Contacts, SMS, Photos, Videos,… Etc).
2- Make sure that you know all the emails and passwords you use on this device.
3- Ensure your Samsung Galaxy device has enough charge level (50% at least).
4- Download Odin flasher and extract it to a known location on your computer.
5- Download the suitable Samsung Firmware package for your Galaxy S Duos GT-S7562.
6- Extract the Downloaded Samsung Firmware package to a known location on your computer.
7- Download and Install Samsung USB Driver for Mobile phones.
Update Samsung Galaxy S Duos GT-S7562 Software (Step by Step):
1- Run Odin3.exe program as Administrator.
2- Make sure these options are checked: Auto Reboot, F.Reset Time.
3- If you want to flash PIT file then check Re-Partition option, Otherwise leave it unchecked.
4- Click on PIT button and select: signed_kyle_v2_0604.pit (Only if Re-Partition option is checked).
5- Click on Bootloader button and select: BOOTLOADER_S7562XXALHB_REV02_user_low_ship.tar.md5
6- Click on PDA button and select: CODE_S7562XXALHB_1034323_REV02_user_low_ship.tar.md5
7- Click on PHONE button and select: MODEM_S7562XXALH5_20120815_REV02_user_low_ship.tar.md5
8- Click on CSC button and select: CSC_DBT_S7562DBTALH3_1069738_REV02_user_low_ship.tar.md5
9- Turn Off your Galaxy S Duos and put it into Download Mode ( Press Volume Down + Home then Power button).
10- After you see the Warning message press the Volume Up button.
11- Use the USB cable to connect it to the computer.
12- Wait until the computer detects the newly connected device completely and installs the needed drivers for it.
13- You should see the COM port number of your device at Odin3 window (0:[COMxx]).
14- Click on the Start button to let Odin3 flasher install the new firmware files on your Galaxy S Duos.
15- The installing process will take several minutes, And when it is done, The Odin3 flasher will reboot your Galaxy device.
16- Look at Odin3 window, If you see PASS! Word at Odin3 program’s window, That means the update was done successfully.
17- Disconnect the USB cable.
18- When your Galaxy S Duos is fully on select your preferred device language and follow the on-screen instructions to proceed with the initial setup.
19- Done, You have updated the software version of your Samsung Galaxy S Duos GT-S7562.
Notice: In case you extracted the Samsung Firmware Package and you got one big file only, Then select it as PDA file.
Read More
938
How To Factory Reset Samsung Galaxy S Duos GT-S7562
You must log in to post a comment