XTC® Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our Easy To Use Adapters. No need to cut the factory wiring to add things like tail lights and whip lights, just unplug the OE harness and plug the adapter between the connectors and run the wire, it is that easy. Our Adapters come with everything needed for install, no hunting around for those extra parts. XTC Power Products are Made In the U.S.A. XTC Gets You Wired For Fun®!
Share on Facebook Share on Pinterest Share on Twitter Share on Email
Installation Help
CAN-AUX-XX-IB
Share on Facebook Share on Pinterest Share on Twitter Share on Email
Inspect the bushings of the cam and of
the sliding sheave of the driven pulley,
while installed in vehicle.
These vehicles are equipped with a
VRLA battery (Valve Regulated Lead
Acid). It is a maintenance-free type
battery, there is no need to add water
to adjust electrolyte level.
Move the passenger seat completely
Disconnect BLACK (-) cable first then
Always respect this order
for disassembly; disconnect BLACK
1. Battery holder retaining screws
Clean battery, battery casing and bat-
tery posts using a solution of baking
Remove corrosion from battery cable
terminals and battery posts using a
firm wire brush. Battery casing should
be cleaned by soft brush and baking
Battery installation is the reverse of the
will damage the voltage regulator.
RED (+) cable first then BLACK (-)
If a fuse is burnt, replace it by one of the
fuse as this can cause severe dam-
Fuses and Fusible Links Location
To access the main fuse box, remove
Reversed battery polarity
Do not use a higher rated
Disconnect BLACK (-) cable first then
Always respect this order
for disassembly; disconnect BLACK
Remove battery holder retaining nut.
2. Battery holder retaining nut
Clean battery, battery casing and bat-
tery posts using a solution of baking
Remove corrosion from battery cable
terminals and battery posts using a
firm wire brush. Battery casing should
be cleaned by soft brush and baking
Battery installation is the reverse of the
the battery cables (reverse polarity)
will result in damage to the voltage
RED (+) cable first then BLACK (-)
If a fuse is burnt, replace it by one of the
fuse as this can cause severe dam-
The vehicle is equipped with two fuse
boxes. The main fuse box, located by
the driver's feet, and the auxiliary fuse
box, located at the back of the vehicle
near the voltage regulator at the right of
Do not use a higher rated