Re: How to change Shift Solenoid
Unread post by butchkaz » Sat Feb 06, 2010 4:28 pm
Terry wrote:Problem with my =Chevy Venture van 04
3.8
Checked plug connection
Question = how to change shift silenoid.
The shift solenoids are in the valve body.
The valve body is behind the tranmsission side cover.
You would need to loosen the steering intermediate shaft and pop it off the steering rack, lower the drivers side of the frame while supporting the engine / trans. / frame so it does not
fall out, remove the transmission mount, left axle, then the side cover. Now the solenoids can be replaced. There are several on the valvebody.
Not somthing I would want to do in my garage.
Be Sure To Check The Related Topics below For More Help.
Re: 1998 Venture Ambient Temp Calibration
Unread post by TerryAuto » Tue Jul 22, 2014 4:38 pm
After replacing the ambient temp sensor, it just takes time for it to calibrate itself. Drive it a few miles, shut it off, then drive a few more miles, then let idle for a few minutes. If that does not work, try disconnecting the battery for a few minutes, then drive it again.
If all else fails, the sensor may not have been the problem. Check that the wiring at the connector for the senos is not corroded.
-
1 Replies4726 Views Last post by carriedi
Mon Aug 31, 2020 4:35 am - 2 Replies5126 Views
Last post by shea123us
Sun Sep 21, 2014 5:46 pm -
1 Replies3571 Views Last post by ProTech
Sun Apr 14, 2013 9:05 pm - 2 Replies5278 Views Last
post by TerryAuto
Sat Dec 29, 2012 4:21 pm -
2 Replies3498 Views Last post by butchkaz
Tue Aug 26, 2014 3:41 pm